Need help?Do you have a question about the GODIAG GT100+AUTO TOOLS OBD II and is the answer not in the manual?
General| Category | Diagnostic Equipment |
|---|---|
| Connectivity | OBD II |
| Compatibility | OBDII compliant vehicles |
| Functions | ECU Connection |
| Power Supply | 12V DC |
| OBDII Protocol | ISO 9141-2, ISO 14230-4 (KWP2000), ISO 15765-4 (CAN), SAE J1850 PWM, SAE J1850 VPW |
| Supported Protocols | SAE J1850 PWM, SAE J1850 VPW, ISO 9141-2, ISO 14230-4 KWP, ISO 15765-4 CAN |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Supported Vehicles | OBDII/EOBD compliant vehicles |
| Model | GODIAG GT100+AUTO TOOLS OBD II |
Detects OBDII protocols and determines communication status.
Tests communication between code reader and vehicle protocol for signal transmission.
Activates instrument/immobilizer for key programming with lost keys.
Displays real-time voltage and current values of the ECU.
Explains pin usage for displaying CAN BUS or K-Line communication protocols.
Quickly communicates with a single ECU on bench for diagnostics/programming.
Connects multiple ECUs for programming tasks, solving complex scenarios.
Provides uninterruptible power during battery replacement.
Addresses issues with OBD2 cable length and narrow vehicle ports.
Connects via banana plug/DB25 jumper for OBD1 or special ports.
Converts OBD1 truck ports to standard OBD2 diagnostic ports.
Tests programmed key works with CAS4 normally.
Tests programmed key works with FEM/BDC modules normally.
To Next Page