Another option is to use the acoustic tone along with the regular
pickups to create one huge tone.
The Solidac features a separate volume control for the acoustic
bridge with a built in pre-contoured pre-amp for a rich and full
By selecting your neck pickup and applying a small amount of
acoustic transducer you can easily achieve a warm sound with
lots of bottom end while maintaining note definition.
The built in active pre-amp for the bridge transducers is powered
by a single 9-volt battery accessible via a small compartment on
the back of the guitar. The pre-amp is activated when the guitar
is plugged in. Therefore, to avoid draining the battery please
make sure to disconnect your cable when the guitar will not be
used for a extended period of time. If the sound of the bridge
transducers begin to sound thin or fuzzy, a battery change is
overdue. Battery life is approximately 300 hours.
The Solidac also features front-loaded locking tuners for easy
string change and better intonation. Simply turn the locking tuner
counter clock-wise to loosen, insert string, tighten the locking
tuner by turning clock-wise and you're done.
*Specs subject to change without prior notice.
Solidac Custom Godin Pickups
Pos. 1 - A,B
Pos. 2 - A,B,C
Pos. 3 - C
Pos. 4 - C,D,E
Pos. 5 - D,E
Godin GHN-1
Godin GS-1
Godin GHB-1
“A”
“B”
“D”
“E”
“C”
Pos.“1”
Pos.“5”
Tone
Volume
Bridge Transducer
The Godin Guitar Company,
19420 Avenue Clark-Graham, Baie D’Urfé Québec Canada H9X 3R8
www.godinguitars.com
Fig. 2
To Previous Page
Loading...
