Need help?Do you have a question about the Godin XTSA and is the answer not in the manual?
General| Body | Silver Leaf Maple center with Poplar wings |
|---|---|
| Neck | Mahogany |
| Fingerboard | Richlite |
| Scale Length | 25.5 inches |
| Controls | 5-way switch, volume, tone, synth volume, program up/down |
| Frets | 22 |
| Nut Width | 1.6875 inches |
| Bridge | Tremolo bridge |
| Synth Access | 13-pin output for Roland GR synthesizer |
Describes the humbucker-single-humbucker pickup configuration and 5-way switch for electric guitar sounds.
Details the bridge transducer system, onboard preamp, and 3-way graphic EQ controls.
Explains how to change the 9-volt battery powering the active electronics.
Describes the three output jacks: Mix/Acoustic, Electric, and 13-Pin.
Details how to use output #1 for mixed acoustic and electric signals.
Explains using output #2 for a separate electric guitar signal.
Describes the 13-pin connector for hexaphonic output to synth devices.
Covers synth volume, momentary switch, and 3-way toggle for 13-pin connection.
Provides guidance on cleaning the guitar body and fingerboard.
Advises on protecting the guitar from humidity and temperature changes.
Explains how to use the front-loaded locking tuners for string changes.
Lists key specs like nut, scale, radius, string gauge, pickups, bridge, body, neck, and fingerboard.
Details the one-year warranty on materials and workmanship from the original purchase date.
Lists items not covered, such as misuse, wear and tear, strings, batteries, and environmental damage.
To Next Page
