EasyManua.ls Logo

Godox V860III-C User Manual

Godox V860III-C
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
V860III-C
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
Question and Answer IconNeed help?

Do you have a question about the Godox V860III-C and is the answer not in the manual?

Godox V860III-C Specifications

General IconGeneral
TypeSpeedlite
Flash Duration1/300s to 1/20000s
TTL ModeYes
Manual ModeYes
Color Temperature5600K ± 200K
Power Levels1/1 to 1/256
Wireless Channels32
Wireless Groups5 (A, B, C, D, E)
Guide Number60 m (ISO 100, 200mm)
Power SourceRechargeable Lithium-Ion Battery Pack
Recycling Time1.5s
Wireless Transmission2.4 GHz
Zoom Range20 to 200mm

Summary

Warning

Name of Parts

Control Panel

LCD Panel

Radio Transmission Shooting

Transmitter Unit (TX)

Details how to set up the flash as a transmitter unit for wireless shooting.

Receiver Unit (RX)

Battery

Features

Describes the features and safety of the Li-ion polymer battery.

Cautions

Lists important safety precautions for handling the battery.

Loading and Unloading the Battery

Explains the procedure for inserting and removing the battery.

Attaching to a Camera

Flash Mode—E-TTL AutoFlash

ETTL Mode

FEC: Flash Exposure Compensation

FEL: Flash Exposure Lock

High-Speed Sync

M: Manual Flash

Wireless Flash Shooting: Radio (2.4G) Transmission

Autoflash Shooting with One Receiver Unit

Details the setup for autoflash shooting with a single receiver unit.

Wireless Multiple Flash Shooting

Auto Shooting with Two Receiver Groups

Shows an example of a two-group wireless flash configuration.

Auto Shooting with Three Receiver Groups

Shows an example of a three-group wireless flash configuration.

Shooting with a Different Flash Mode set for Each Group

Wireless Settings

Transmitter Unit Setting

Details how to configure the transmitter unit for wireless operation.

Receiver Unit Setting

Details how to configure the receiver unit for wireless operation.

Setting the Communication Channel

Wireless ID Settings

ETTL: Fully Automatic Wireless Flash Shooting

Using Automatic Wireless Flash with Multiple Receiver Units

M: Wireless Flash Shooting with Manual Flash

Setting <M> Flash Mode

The Reason & Solution of Not Triggering in Godox 2.4G Wireless

Bounce Flash

ZOOM: Setting the Flash Coverage

C.Fn: Setting Custom Functions

Control with the Camera's Menu Screen

Protection Function

Number of flashes that will activate over-temperature protection in high-speed sync triggering mode

Other Protections

Technical Data

Technical Data (continued)

Troubleshooting (continued)

Firmware Upgrade

Compatible Cameras Models

Maintenance

Related product manuals