GoECOlife GMW100P User Manual

How To Use Your Shredder: Model GMW100P
Setup Instructions:
1. Mount the shredder correctly to the basket (see picture below).
2. Connect the power cord to any standard 120 volt AC outlet. For pluggable equipment,
the socket-outlet shall be installed near the equipment and shall be easily accessible.
3. Move switch to ON position.
4. Insert paper to activate.
Setup Cautions:
1. All shredders have very sharp, exposed blades on the underside. Please use care when
mounting the shredder on to the wastebasket.
2. Make sure power cord is not damaged in any way and that the outlet is properly functioning.
3. Never attempt to shred sealed envelopes. Doing so may damage the shredder. Always
remove and unfold envelope contents completely before attempting to shred. NEVER shred
envelopes, labels or anything with glue or any sticky substance as this will lead to paper jams.
4. It is normal for residual lubricant in the motor to burn off during the first several extended
uses of your shredder. Should you notice a slight burning odor or the presence
of small wisps of smoke during the first several extended uses, you may continue using
the shredder. If either symptom continues to occur after repeated use, please
contact technical support for assistance.
Overfeed Prevention Technology. Paper jams are the leading cause of damage to
shredders. Overfeed Prevention Technology reduces the likelihood of a paper jam
by limiting the number of sheets that can be inserted into your shredder, thereby,
prolonging the life of your shredder. It also helps eliminate the inconvenience of
having to clear paper jams. If you are unable to insert a stack of paper into the
entry throat, simply reduce the number of sheets.
GoECO™ Power-Saving Technology (patent-pending) consumes power ONLY
during actual shredding operation. This means your shredder will not experience
“phantom load” (non-operational power drain) saving energy and money.
SPECIFICATIONS:
Shredding Capacity: 10 Sheets of 20lb (75 gsm) paper
Media Type: Credit Card, CD, DVD* (insert one at a time)
Shred Type: Micro Cut
Shred Size: 0.12 in. x 0.35 in. (3 mm x 9 mm)
Throat Width: 8.78 in. (223 mm)
Credit Card/CD/DVD
Rev / Off / On
Feed Opening
*For recycling purposes, please keep paper waste
and credit card/CD/DVD waste separated.
REVERSE
OFF
ON / READY
CREDIT CARD
CD/DVD
ON
Door Open
Overload
Overheat
http://www.monomachines.com/
http://www.monomachines.com/

GoECOlife GMW100P Specifications

General

Brand	GoECOlife
Model	GMW100P
Category	Paper Shredder
Language	English

Summary

Setup Instructions

Mounting and Power Connection

Instructions for correctly mounting the shredder and connecting the power cord to an AC outlet.

Operating the Shredder

Steps to move the switch to ON and insert paper to activate the shredder for operation.

Setup Cautions

Blade Safety and Handling

Cautions regarding sharp blades, handling the shredder, and avoiding damage from sealed envelopes.

Motor Lubricant and Smoke

Information about normal lubricant burn-off during initial uses and when to seek technical support.

Helpful User Tips

Clearing a Jam

Instructions for clearing paper jams using reverse and auto functions, and manual removal if necessary.

Overheating and Cooling

Guidance on what to do if the shredder overheats, including cooling down and emptying the basket.

Bin Full and Basket Emptying

Explanation of the bin full sensor and precautions for safely emptying the wastebasket.

Staples and Paperclips

Advice on removing staples and paperclips to prevent shredder damage and maintain performance.

Shredder Maintenance

Lubricating Shredder Blades

Instructions on regularly lubricating shredder blades using specific lubricants and avoiding spray lubricants.

Using Shredder Lubricant Sheets

Detailed steps for using shredder lubricant sheets to maintain cutting mechanism performance.

Product Warranty and Service

Limited Product Warranty

Details the one-year limited warranty covering defects in material and workmanship, and exclusions.

Warranty Void Conditions

Conditions that will void the warranty, including failure to lubricate and tampering with the machine.

Return Instructions

Step-by-step guide for returning a defective product for service, including obtaining an RA#.

Safety Warnings

General Safety Precautions

Essential warnings about keeping the device away from children/pets and avoiding fingers in the feed slot.

Prohibited Materials and Liquids

Warnings against using flammable chemicals, petroleum-based oils, or liquids near the shredder.

Conditions Requiring Immediate Stop

Identifies critical conditions like bent blades or unusual motor noises that necessitate stopping operation.