To Next PageTo Next PageWhat to do if I smell gas with GOK Automobile Accessories?
If you smell gas when using GOK Automobile Accessories, immediately close the gas supply. Avoid using any electrical switches or phones inside the vehicle, and refrain from smoking. Ensure the rooms are well-ventilated. Shut down the LPG system and contact a specialized company for assistance, as leaking LPG is extremely flammable and can cause explosions.
How to fix no gas flow in GOK Automobile Accessories?
If there is no gas flow in your GOK Automobile Accessories, make sure that the gas cylinder valve or the shut-off fittings are open. Also, check the activation of the crash sensor.
What to do if safety two stages regulator S2SR reacted in GOK Automobile Accessories?
If the safety two stages regulator S2SR in your GOK Automobile Accessories has reacted, allow short bursts of gas to escape from the gas equipment to achieve pressure compensation. If this doesn't work, replace the pressure regulator.
Why is there an abnormal flame pattern in my GOK Automobile Accessories?
Compare the nominal outlet pressure of the pressure regulator with the nominal inlet pressure of the connected consuming device. If they don't match, replace either the pressure regulator or the gas appliance in your GOK Automobile Accessories.
General| Brand | GOK |
|---|---|
| Model | Caramatic SafeDrive |
| Category | Automobile Accessories |
| Language | English |
Specifies the intended application and operating media for the product.
Defines where the product can be used, including vehicle types.
Specifies the required location for operation, like a gas bottle locker.
Details connection points for the device within the gas system.
Describes the correct physical orientation for installation.
Lists and describes optional inlet connections with their specifications.
Lists and describes optional outlet connections with their specifications.
Describes the medium pressure hose assembly and its specifications.
Explains the function of the two-stage pressure regulator.
Describes how the crash sensor pendulum operates to block gas flow.
Provides warnings and instructions for making secure screw connections.
Offers general guidance and precautions during the assembly process.
Warns about issues arising from incorrect installation direction and how to prevent them.
Outlines the sequential steps for installing the device and its components.
Details a simplified method for checking for gas leaks using foaming agent.
Lists common fault causes for the product and their potential actions.
