5
GND SIGNAL GROUND
Every system operates in unique conditions
due to the electrical interaction between
different products and the electrical wiring
and the GND connector on the PSU-5 allows
you to try different congurations.
If there are signs of EMI (Electro Magnetic
Interference) or RFI (Radio-Frequency
Interference), please try to connect the GND
posts of device and the PSU.
MASTER-SLAVE MODE
All our PSUs are designed to work in
“Master-Slave Mode” with other Gold Note
units.
When you turn ON (or put in standby) the
master unit, the PSU-5 will do the same so
that you don’t have to control every unit
manually.
To turn completely OFF the PSU-5, follow
these steps:
1 Turn OFF the MASTER SWITCH of the
master unit.
2 Turn OFF the MASTER SWITCH of PSU-5
To Next Page
Loading...