The Goldair Heated Foot Warmer, model GFW100, is an appliance designed to provide warmth and comfort to the feet. It features a soft, plush exterior, likely made of a fleece or similar material, with a sherpa-lined opening for inserting feet. The device is controlled by an attached white remote with an on/off switch and a button to adjust heat settings, indicated by LED lights.
Function Description:
The Goldair Heated Foot Warmer is intended for household use to provide warmth and comfort to the feet while sitting on a couch or in a chair. It operates by generating heat through internal elements. The device is not suitable for commercial or industrial use, nor for medical purposes in hospitals. It should only be used indoors.
Important Technical Specifications:
- Model: GFW100
- Controller Type: QDK20-KE4
- Supply: 220-240VAC 50-60Hz
- Wattage: 110W
- Heat Levels: 4 adjustable heat levels
- Auto-off Function: Automatically turns off after 90 minutes of operation.
Usage Features:
- Unfolding Before Use: Before initial use, the foot warmer must be unfolded.
- Controller: The attached controller features an on/off switch and a heat setting button. LED lights indicate the current heat setting.
- Heat Settings: The controller offers 4 heat levels, allowing users to select their preferred temperature.
- Power On/Off: To turn on, press the power button on the controller. To turn off, press the power button again and unplug the device when not in use.
- Auto-Off: The foot warmer is equipped with an auto-off function that deactivates the device after 90 minutes of continuous operation.
- Safety Precautions:
- Never sleep with the foot warmer turned on.
- Ensure the power cord is not tight or pulled, as this can cause overheating of the plug and socket, leading to fire.
- Do not operate the foot warmer when folded, kinked, or overlapped, as this can lead to heat build-up and a hazard.
- The power cord must be routed to prevent it from being sat on or rolled on.
- Do not use if there are visible signs of damage.
- Only use the controller provided by the manufacturer.
- Children under 3 years old should not use the appliance due to their inability to react to heat. Children over 3 should only use it if controls are pre-set by a parent/guardian or if they are adequately instructed on safe operation.
- Individuals with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, should only use the appliance under supervision or after receiving instructions from a responsible person.
- This foot warmer should not be used by infants, incapacitated persons, paraplegics, quadriplegics, diabetics, or any person insensitive to heat or other vulnerable persons unable to react to overheating.
- Do not trap, wrap, or fold cords between bed slats, mattress, springs, or against walls/headboards/bed frames.
- Do not pinch, flex, or expose the heating wire.
- Do not place the power cord under carpet, rugs, or furniture. Arrange the cord to prevent tripping hazards.
- Do not use pins, needles, safety pins, or other sharp items on the foot warmer, as they can damage the electric wiring.
- Keep all pets away from the foot warmer.
- Do not tuck in the foot warmer, as this may cause overheating and/or fire.
- Always unplug the appliance when not in use.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons.
- If the appliance does not work or is not working properly, contact the place of purchase or the Goldair Customer Services Team.
- Repair work by unqualified persons can pose a serious risk to the user; only a qualified electrician should perform repairs.
- There are no user-serviceable parts inside the foot warmer.
- Ensure hands are dry before handling the plug or controls.
- It is recommended to plug the foot warmer directly into a wall socket. If an extension cord is used, it must be correctly specified, undamaged, and used safely.
Maintenance Features:
- Storing: Always allow the foot warmer to cool completely before folding and/or storing. Roll or fold it loosely and store it in a blanket bag. Avoid creating sharp creases that could bend the element wires.
- Cleaning (General):
- DO NOT dry clean.
- DO NOT iron.
- DO NOT bleach.
- DO NOT use a wringer.
- DO NOT use mothballs or sprays of any kind.
- DO NOT turn on the foot warmer until it is completely dry.
- DO NOT use harsh cleaning fluids as they may damage the insulation of the heating element.
- DO NOT use if moist or wet.
- Spot Cleaning:
- Unplug the foot warmer and remove the liner.
- Wet sponge the affected area with a mild soap and lukewarm water solution (less than 30°C).
- Gently sponge with clean water.
- Use a neutral-colored towel to absorb excess water.
- Hand Washing:
- Unplug the foot warmer and remove the liner.
- Presoak the foot warmer for 15 minutes in a mild soap and lukewarm water solution (less than 30°C).
- Gently squeeze soap suds through for a few minutes.
- Rinse in fresh lukewarm water.
- Machine Washing (Inner Liner Only):
- Ensure water temperature is less than 30°C.
- Wash in mild soap on the delicate or gentle cycle.
- Rinse in fresh lukewarm water.
- Machine Dry (Inner Liner Only):
- Place the inner liner into the dryer and tumble dry on a low setting until damp (approx. 30 minutes).
- Remove the inner liner while still damp and gently stretch to its original size.
- Continue to air dry over a clothesline or shower rod. DO NOT use clothes pegs or clips.
- Air Drying:
- Gently stretch the foot warmer to its original size.
- Air dry over a clothesline or shower rod. DO NOT use clothes pegs or clips.
Need help?
General
To Next Page