- INSTALLATION
Connection antenna
Connect your antenna cable to the T2/C INPUT
Using HD cable
For digital television, it is recommended to use an HD cable.
In case the TV has an HD input connector, it is advisable to use it to get a better image quality.
Using RCA cable
If there is no HD input on your TV-set you can connect the receiver to your TV-set using an RCA cable.
- START USING STB
Switch ON STB
Plug the power adapter of the receiver into an electrical outlet.
Press the red power button on the remote control to turn the receiver on.
To Next Page
Loading...
Need help?
General
