Need help?Do you have a question about the GOLDONI SUPER SPECIAL Series and is the answer not in the manual?
Details warranty terms for the engine/tractor and procedures for ordering replacement parts.
Identifies the machine using model, series, and chassis numbers found on a specific plate.
Details the procedure for starting and stopping the engine using the motorstop and clutch levers.
Explains how to engage the 6 forward and 2 reverse gears using the gear lever and clutch.
Describes the top and bottom PTO, splines, and recommendations for using implements with inertia.
Details the operation and selections for the bottom PTO, including separate and synchronized modes.
Explains the use of the top PTO, primarily for connecting irrigation pumps, and its operating speeds.
Describes how to engage and disengage the differential lock for improved traction on slippery surfaces.
Details the horizontal and vertical adjustment of the handlebars for operator comfort and control.
Explains how to operate the brakes for total stopping and the implications of using individual brake levers.
Lists and describes the controls within the electric system, including switches and indicator lights.
Explains the function of the starter switch positions for starting the engine and operating parking lights.
Provides guidance on replacing fuses, checking battery electrolyte levels, and maintaining the battery.
Details the engine shutdown (Motorstop) and PTO cut-out safety features and their importance.
Refers the user to the separate Engine Instruction Manual for engine-specific maintenance.
Details procedures for checking gearbox oil, filling, and performing general greasing.
Outlines procedures for registering components and performing regular checks on the machine.
Explains how to check and adjust the clutch, throttle, motorstop, and brake cables.
Provides recommended tyre inflation pressures in bar and kPa for different tyre sizes.
Presents a speed chart indicating the machine's speeds in km/h for different gears at 3000 engine RPM.
Lists the outside wheelbase dimensions (width) for different wheel sizes.
To Next Page
General