Need help?Do you have a question about the goldstein FRE-18D and is the answer not in the manual?
Connect to 21kW, 3 phase Neutral & Earth by a licensed electrician.
Never operate empty frypot; fill to correct oil level before switching on.
Fill to indicated level; dip out old oil daily and add fresh for longevity.
Use quality frying compound; avoid melting solid shortening on the base; set optimal temperature.
Handle hot shortening with care; use a metal container; open drain slowly to avoid splattering.
Use specific tool for clogs; do not hammer valve; avoid inserting into drain valve.
Allow drained shortening to cool to 38°C or lower to prevent severe burns.
Ensure fryer is off; fill to oil-level line; pack solid shortening; melt carefully.
Melt solid shortening by short bursts of heat to avoid scorching or smoke.
Guidance for common problems, to be performed by authorized personnel.
Factory approval is required for any warranty work; Goldstein cannot be held responsible otherwise.
Common issues like no power, oil overheating, drain leaking, and temperature control problems.
Do not turn controller adjustment past stops to prevent damage.
Electrical wiring diagram for the FET18 digital control model.
Electrical wiring diagram for FRE-18D and FRE-24D models.
To Next Page
General