To Next PageTo Next Page
Need help?Do you have a question about the goldstein GPG-30, GPG-45, GPGDB-12 and is the answer not in the manual?
Steps before physically installing the griddle unit.
Instructions for authorized technicians regarding gas and level installation.
Procedures for initial burner lighting, pressure adjustment, and plate preparation.
Step-by-step guide for correctly placing frets into the GPGDSA model.
Detailed steps for lighting the pilot and main burners using the control knob.
Description of burner design, material, and air ratio adjustment.
Details on salamander griddle burners, ports, and flame control.
Information on pilot types, injector spuds, and flame size adjustment.
Specifications for various injector sizes and thread types for different models.
Procedure for safely removing burners, including clearing the injector.
Overview of gas control valves and maintenance for smooth operation.
Table showing injector sizes for different gas types and models.
Steps for converting the appliance from Natural Gas (N.G.) to LPG.
Dimensions for air and flue gas inlet/outlet for GPG30 and GPG-45 models.
Dimensional drawings and specifications for GPG-30 and GPG-45 models.
Daily and periodic cleaning procedures, including warnings about cleaners and drying.
Addresses issues with bottom, top, and side-to-side heat distribution affecting cooking.
Troubleshooting for dried products and pilot flame outages due to pressure or components.
Solutions for burner flame issues like flashing back, yellowing, or being noisy.
Exploded view diagram of griddle plate and bench-mounted components.
Exploded view diagram for GPGDB/SA models.
General