GOLDTOUCHMOUSE
Bluetooth
Quick Installation Guide
© 2011 Keyovation, LLC. All rights reserved. Goldtouch, the Goldtouch
logo and Productivity through Prevention®
are registered trademarks of
Key Ovation, LLC
Windows XP SP2, SP3
Pairing the Goldtouch Comfort Mouse
1. From Control Panel, double-click “Bluetooth Devices”.
2. From the Bluetooth Devices window, press the “Add” button.
3. Ensure the mouse is turned on and in pairing mode by pressing the
recessed button on the bottom of the mouse.
4. From the Add Bluetooth Devices window, please follow the instruc-
tions, and click the checkbox next to “My device is setup and ready to
be found.”
5. Once the device is detected, select the Goldtouch Comfort Mouse
and click “Next”.
6. When prompted for a passkey, click the radio button for “Don’t use a
passkey”. and click “Next”.
7. The wizard will connect to the device and the “Add Bluetooth De-
vice” wizard will complete. To close the wizard, click “Finish”.
Windows 7
Pairing the Goldtouch Comfort Mouse
Ensure the mouse is turned on and in pairing mode by pressing the
recessed button on the bottom of the mouse
1. From the Start Menu, select “Devices and Printers”.
2. Click the button labeled “Add a Device”.
3. From the “Add a Device” window, select the Goldtouch Comfort
Mouse once it has been detected, then click “Next”.
4. Upon successful completion, the screen will display “This device has
been successfully added to this computer.”.
5. Click “Close”.
Goldtouch Bluetooth Mouse Quick Install Guide
The Goldtouch Comfort Mouse is designed to utilize Microsoft
and Apple’s built-in support for Bluetooth devices. There are
no third-party drivers required to use the Goldtouch Comfort
Mouse. This Quick Install Guide will walk you through the steps
required to pair your new Bluetooth mouse with your computer.
The Goldtouch Comfort Mouse is compatible with any imbedded
or third-party Bluetooth adapter.
If your computer has a built-in Bluetooth adapter, then the
optional Goldtouch Bluetooth adapter is not required.
To put the mouse in pairing mode, simply press the recessed
button on the bottom of the mouse using a paperclip or the tip
of a pen.
Windows Vista
Pairing the Goldtouch Comfort Mouse
Ensure the mouse is turned on and in pairing mode by pressing the
recessed button on the bottom of the mouse
1. From the Control Panel, open the “Network and Internet” section.
2. Under “Bluetooth Devices” click “Set up a Bluetooth enabled device.
3. From the Bluetooth Devices window, press the “Add” button.
4. From the Add Bluetooth Devices window, follow the instructions,
and click the checkbox for “My device is setup and ready to be found.”.
5. Once the device is detected, select the Goldtouch Comfort Mouse
and click “Next”.
6. When prompted for a passkey, click the radio button for “Don’t use a
passkey”. and click “Next”.
7. The wizard will connect to the device and the “Add Bluetooth De-
vice” wizard will complete. To close the wizard, click “Finish”.
Mac OS X
Pairing the Goldtouch Comfort Mouse
Ensure the mouse is turned on and in pairing mode by pressing the
recessed button on the bottom of the mouse
1. From System Preferences, click the Bluetooth icon located in the
Internet and Wireless Section
2. Click the button labeled “Set Up New Device”.
3. From the “Bluetooth Setup Assistant, select the Goldtouch Comfort
Mouse once it has been detected, then click “Continue”.
4. Upon successful completion, the screen will display “Congratula-
tions, your computer is now setup to use your Bluetooth mouse”.
5. Click “Quit.
To Next Page
Need help?
General
