Need help?Do you have a question about the Goldwing RC SLICK540 70E and is the answer not in the manual?
Details GoldWing RC's guarantee on material and workmanship, covering warranty and return policy for the aircraft.
Highlights aerodynamic features like streamlined canopy and SFGs, pre-hinged surfaces, and quality accessories.
Instructions on using covering iron and heat gun for adhesion, and sealing hinge gaps for improved flight.
Detailed steps for assembling the rudder, including control horn installation and servo bay setup.
Instructions for bolting the main gear to the fuselage and installing wheel axles with collars and thread-lock.
Guides fitting wheel pants and securing them, and assembling the tail wheel for electric airplanes.
Guides control horn installation on ailerons and servo mounting, routing, and linkage adjustment.
Guides elevator control horn fitting, stabilizer gluing, servo mounting, and linkage adjustment.
Details blind nut pre-installation and using washers/crosses to position the motor correctly behind the firewall.
Instructions for testing cowl fit, aligning pre-drilled holes, and securing with self-threading screws.
Guidance on securely mounting receivers and batteries, ensuring proper vibration isolation and cooling.
Ensures secure routing of servo and battery leads, checking wire quality and connector integrity.
Recommends initial CG setting and explains how to trim for level flight, checking for pitch sensitivity.
Provides recommended low and high rate control surface deflections for elevator, rudder, and ailerons.
Check batteries, radio systems, and wing installation before the first flight.
General| Brand | Goldwing RC |
|---|---|
| Model | SLICK540 70E |
| Category | Toy |
| Language | English |
To Next Page
