EasyManua.ls Logo

Goldwing RC MX2 50CC V4 - User Manual

Goldwing RC MX2 50CC V4
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
All contents copyright 2014, GoldWing RC Version 2.0, Feb 2014
GoldWing RC
MX2 50CC V4
Giant Scale Aerobatic Aircraft
Question and Answer IconNeed help?

Do you have a question about the Goldwing RC MX2 50CC V4 and is the answer not in the manual?

Summary

A QUICK WORD ABOUT SAFETY AND RADIO CONTROL FLYING MODELS

Goldwing RC WARRANTY AND RETURN POLICY

Included Features

AIRCRAFT COVERING

Covering Ironing Technique

Use a covering iron at medium temperatures to secure all seams and edges.

Sealing Exposed Wood

Apply epoxy to exposed wood areas to prevent engine oil soaking.

Optional Hinge Gap Sealing

Optional step to seal hinge gaps for improved flight performance.

RUDDER ASSEMBLY

Rudder Control Horns

Install and glue carbon fiber rudder control horns to the rudder.

Rudder & Servo Mounting

Mount the rudder servo and connect it to the fuselage.

Linkage Adjustment & Checks

Center rudder servo and adjust cables for proper operation.

Pull-Push Linkage Option

Alternative setup using pull-pull cables for rudder control.

LANDING GEAR ASSEMBLY

Main Gear Attachment

Bolt the main landing gear to the bottom of the fuselage.

Wheel Axle Installation

Install wheel axles, collars, and wheels onto the landing gear.

Tailwheel Pant & Spring

Fit the tailwheel pant and attach the tailwheel spring.

WINGS ASSEMBLY

Aileron Control Horns

Prepare and glue aileron control horns into the wing slots.

Aileron Servo Installation

Install aileron servos into the wing and connect servo extensions.

Aileron Pushrod Connection

Connect the pushrods from the servo arm to the control horn.

ELEVATOR ASSEMBLY

Elevator Control Horns

Prepare and glue elevator control horns into the elevator surfaces.

Elevator Servo Installation

Mount elevator servos and connect them to the control horns.

Elevator Pushrod Adjustment

Set elevator pushrods for centered servo arm and flat elevator.

ENGINE, EXHAUST, & FUEL SYSTEM INSTALLATION

Engine Mounting

Mount the engine securely to the firewall using bolts and locknuts.

Ignition & Throttle Servo

Install ignition module and throttle servo with linkage.

Fuel Tank & Lines

Secure the fuel tank and connect fuel lines to carb and fueling port.

Exhaust System Fitting

Trial fit and determine supports for muffler, canister, or tuned pipe.

COWLING INSTALLATION

Cowl Fitment for Engine

Mark and trim cowl for cylinder head clearance and exhaust outlet.

Cooling Louver Cutting

Use template to cut cooling louvers in the bottom of the cowl.

Securing the Cowl

Attach the cowl using bolts and washers, applying thread-lock.

FINAL RADIO SYSTEM INSTALLATION

Receiver & Switch Mount

Mount receiver and switches securely, routing wires neatly.

Battery Securement

Secure receiver batteries with velcro and straps to prevent movement.

Servo Lead Checks

Check servo and battery leads for quality, tight connectors, and no frayed wires.

Balancing and Pre-Flight Checks

Final Assembly and Pre-Flight Inspections

Pre-Flight Battery;Radio Check

Ensure all batteries are charged and radio systems are operational.

Rudder Installation Check

Verify rudder is correctly installed and connected to the fuselage.

Control Surface Deflections

Set low and high rates for elevator, rudder, and aileron deflections.

Goldwing RC MX2 50CC V4 Specifications

General IconGeneral
BrandGoldwing RC
ModelMX2 50CC V4
CategoryToy
LanguageEnglish

Related product manuals