3. Advanced Operations
3.1. Dynamic Green View /
PIN Placement Setting
You will see the green shape change as you move
to different sides of the green while on the main
screen or green view screen. This “Dynamic Green
View” means you will always get the Front /Center/
Back distances from your angle of approach.
To select green view screen, touch the
icon
in the bottom right from the Setting Screen or
touch the green shape twice from main screen.
From the green view screen, touch and drag the
PIN to desired location to set the PIN position. The
distance of the centre will now read to the new PIN
placement.
Touch the
icon at the bottom left corner to go
back to the main screen.
01_0205VT3 manual (영어).indd 18 14. 2. 13. 오후 5:28
To Next Page
Loading...
