Need help?Do you have a question about the Gonotec OSMOMAT 3000 and is the answer not in the manual?
Explains safety notice symbols and signal words used in the manual.
Defines the product's intended purpose and usage guidelines.
Details various hazards including electrical, infection, injury, device damage, and measurement reproducibility.
Outlines operator duties for safe device operation and compliance with regulations.
Defines qualifications and roles for users, lab supervisors, and service technicians.
Provides a front view overview of the device and its components.
Explains the osmolality measurement principle and freezing point depression.
Details the components used for measurement, like elevator, sensors, and vessels.
Describes the device's touchscreen interface and operation.
Describes packaging materials, handling, and disposal considerations.
Specifies conditions for storing the device properly.
Details procedures for safely transporting the device within a laboratory.
Guides the user through selecting an installation site and preparing the device.
Explains how to connect the device to power, PC, and barcode reader.
Describes how to check the printer and paper roll feed direction.
Instructs on checking the cryst-needle's free movement.
Guides setting calibration intervals, standards, and methods.
Step-by-step guide to powering up the device.
Explains how to configure language and screen contrast settings.
Detailed steps for measuring individual samples.
Guide for performing batch or series measurements.
Detailed procedures and methods for calibrating the device.
General safety warnings relevant to troubleshooting.
Advice on handling errors and contacting the manufacturer.
A table listing error descriptions, causes, remedies, and personnel.
Procedures for resolving common device errors and component replacement.
Safety warnings relevant to servicing the device.
Outlines required service activities and their intervals.
Initial steps before performing servicing tasks, like removing the front panel.
Instructions for lubricating the elevator guide with silicone spray.
Warnings and procedures for disposing of consumables and biohazards.
Guidelines for proper disposal of electronic waste and devices.
Physical dimensions of the device.
Details on measuring range, resolution, and reproducibility.
Specifies environmental conditions for device operation.
Electrical specifications, fuses, interfaces, and protection classes.
Procedures and considerations for returning the device for repair or refund.
Details warranty duration, terms, exclusions, and limitations.
Describes the intended use and applications of the Osmomat 3000.
Declaration of compliance with EU directives, including CE mark acknowledgment.
General| Measurement Principle | Freezing point depression |
|---|---|
| Measurement Time | Approx. 60 seconds |
| Display | LCD |
| Interface | RS232 |
| Power Supply | 100-240 V, 50/60 Hz |
| Cooling | Peltier cooling |
| Measurement Range | 0 to 3000 mOsmol/kg H2O |
| Resolution | 1 mOsmol/kg |
| Reproducibility | ±1 mOsmol/kg H2O |
| Calibration | Automatic |
| Sample Volume | 50 µL (20 µL with special sample tubes) |
To Next Page