Gonset G-66 - General Description

GENERAL DESCRIPTION
The GONSET 6-66 receiver is a double-conversion
superbeterodyne intended primarily for the amehile
reception of signals in the LO dhrough l60-meter
amatenr bands, Provision for the ceeepti
broudease sigoals is inelucted, thoy) ctiosias
nee for a separate receiver for broadcast recep
} atures a built in S meter. highly etfee
tive noise limiting, and exceltend Hequrnes lity.
The illuminated slice-rule tuning diat provides easy
readability under mobile operating conditions.
Although
designed
mainly
for
mobile
applications,
che
G-G6
receiver
may
also
be
used
for
fixed-station
of
émergency-portable
operation.
The G-66B receiver incorporates an additional
stage of i-f amplification which improves the noise-
limiting action on the higher-frequency bands. In
addition, a slight change in the a-v-c voltage distribu
The receiver
tion te (he rf
Signal to noise
The GONSET No, $060 universal power supply,
accessory to the G66 receiver, permits operation
fom either a haw-veltipe ale power some ar bran
118
volts
ave,
The
power
supply
nay
be
actrehed
slireatly to the rear of dhe teesiver or connedted
through able patch cord which is supplied. A
speaker is contained in this power-supply unit and
connections are provided to operate the receiver
through either this speaker or a “custom” dash-
mounted speaker as desired.
The GONSET No. 3098 power supply is also
available for use with the G-G6 receiver. Operating
only from a 12-volt d-c power source, it may be
attached directly co the receiver case or patch-cord
connected. No speaker is included in this unit.
auplitive provides a slightly better
fo for weak si atts,