The provided document is a user manual for the GOOD HOUSEKEEPING ADELINE 52 IN. LED CEILING FAN, Model# 63173. This manual outlines the installation, operation, and maintenance of the ceiling fan, emphasizing safety precautions and troubleshooting tips.
Function Description:
The Good Housekeeping Adeline 52-inch LED Ceiling Fan is designed to provide air circulation and illumination for residential spaces. It features a reversible motor for year-round use, allowing for a downward airflow in warm weather to create a cooling effect and an upward airflow in cool weather to redistribute warm air from the ceiling. The fan is equipped with an integrated 25W LED light kit for ambient lighting. Its operation is controlled via a remote, offering convenience and ease of use. The fan is intended for indoor use and must be mounted to a UL Listed outlet box marked "FOR FAN SUPPORT."
Important Technical Specifications:
- Model Number: 63173
- Fan Size: 52 inches
- Light Kit: 25W integrated LED
- Voltage: 120 Volts
- Frequency: 60Hz
- Fan Speeds (Low/Med/High):
- Amps: 0.30 / 0.43 / 0.60
- Watts: 13 / 34 / 65
- RPM: 60 / 115 / 160
- CFM: 1697 / 3011 / 4325
- Net Weight (N.W.): 7.7 kg (16.98 lbs)
- Gross Weight (G.W.): 8.8 kg (19.4 lbs)
- Cubic Feet (C.F.): 1.87 cu. ft.
- Mounting: Requires an outlet box marked acceptable for fan support of 15.9 Kg (35 lbs) or less.
- Blade Clearance: Minimum 7 feet from the trailing edge of the blades to the floor.
- Ceiling Angle: Maximum allowable 18° away from the pitch of the ceiling.
- Speed Control: Designed to be used with fan speed control model no. FAN61T-3SP1 WHT. Not compatible with variable wall controls.
Usage Features:
- Remote Control Operation: The fan is operated using a handheld remote control (H).
- Fan ON/OFF and Speed Control: Buttons for turning the fan ON/OFF and selecting Low, Medium, or High speeds.
- Light Control: A dedicated button controls the light and brightness settings. Pressing and releasing turns the light ON/OFF. Pressing and holding the button adjusts brightness, cycling from maximum to minimal illumination. The light features an auto-resume function, retaining the last brightness setting.
- Delay OFF Button: A button delays the light turning off for approximately 5 seconds, allowing time to exit the room.
- Reversible Motor: A reverse switch located on the switch housing allows for seasonal adjustment of airflow.
- Forward (Switch Left): Creates a downward airflow for a cooling effect in warm weather.
- Reverse (Switch Right): Creates an upward airflow to move warm air off the ceiling area in cool weather.
- Note: The fan must be turned off and blades stopped before changing the reverse switch setting.
- Reversible Blades: The fan blades (E) are reversible, allowing users to select a finish that best matches their decor.
- Installation Flexibility: Can be mounted with a standard downrod. A longer downrod may be needed for steep, sloped ceilings to maintain proper blade clearance.
- Mounting Bracket: A mounting bracket (A) secures the fan to the ceiling outlet box. The hanger ball of the downrod assembly (I) seats into the mounting bracket socket, with a tab in the socket resting in the groove of the hanger ball for secure installation.
Maintenance Features:
- Periodic Inspection: It is recommended to check support connections, brackets, and blade attachments twice a year to ensure they are secure.
- Cleaning:
- Clean the fan periodically with a soft brush or lint-free cloth to maintain its appearance.
- Avoid using water or detergents, as this can damage the motor, wood, or cause electrical shock.
- The plating is sealed with lacquer to minimize discoloration or tarnishing.
- A light coat of furniture polish can be applied to wood blades for protection and enhanced beauty. Small scratches can be covered with a light application of shoe polish.
- Lubrication: The motor has permanently lubricated bearings, so no oiling is required.
- Troubleshooting Guide: The manual includes a section to address common issues such as the fan not starting, noisy operation, excessive wobbling, and the light not working. Solutions include checking circuit fuses/breakers, tightening screws, ensuring proper wire connections, allowing a "breaking-in" period for new fans, and balancing blades.
- Blade Balancing: All blades are grouped by weight, but natural wood variations can cause wobble. The manual provides a procedure for balancing the blades by checking blade and blade holder screws, measuring blade levels, and interchanging adjacent blades if necessary. A balancing kit can be requested from customer service if wobble persists.
- Warranty: The fan motor is covered by a lifetime warranty for the original purchaser against defects in workmanship and material. All other fan parts (excluding glass or acrylic blades) are warranted for two years. The warranty is voided if the fan is not purchased and used in the contiguous USA, or if damage results from accident, misuse, improper installation, or unauthorized servicing.
To Next Page
General
