Goodbaby UU 24 User Manual (English)

Questions and Answers:

B
brettvasquezJul 28, 2025
What to do if my Goodbaby Baby Monitor has interference or poor reception?
- T
  Todd WillisJul 28, 2025
  If your Goodbaby Baby Monitor experiences interference or poor reception, it could be due to several factors. The camera or monitor might be too close to metal objects; in this case, move the monitor closer to the camera. Another cause might be interference from other electronic devices, try restarting both the Baby unit and the Parent unit. Also, check the battery power, as a low battery can cause this issue. You can press the reset key at the back of the Parent unit.
H
hillmicheleAug 5, 2025
How to fix Goodbaby UU 24 Baby Monitor when there is no reception?
- D
  Deborah RodriguezAug 5, 2025
  If your Goodbaby Baby Monitor shows no reception, start by confirming that both the camera and monitor are turned ON. Ensure the power adapters are properly connected. If the camera is too far from the monitor, restart both the Baby unit and the Parent unit. If the camera and monitor are not properly paired, follow the PAIRING instructions. You can also press the reset key at the back of the Parent unit.
R
Robert CochranAug 12, 2025
What to do if my Goodbaby UU 24 Baby Monitor image is frozen?
- B
  Brian HayesAug 13, 2025
  If the image on your Goodbaby Baby Monitor is frozen, try restarting the baby unit by unplugging the adapter and then plugging it back into the socket. Alternatively, press the reset key located at the back of the parent unit, hidden behind the stand.
M
Michelle EvansAug 20, 2025
Why does my Goodbaby UU 24 Baby Monitor have feedback (screeching, static)?
- S
  Shane WalkerAug 20, 2025
  Feedback, such as screeching or static, on your Goodbaby Baby Monitor, may occur if the camera and monitor are too close together. You can also press the reset key at the back of the Parent unit. Additionally, the volume on the monitor may be set too high.