This document describes the assembly, safety, guarantee, and maintenance of a sliding door system for furniture, likely a wardrobe or cabinet. The product is identified as "atomia" and "GoodHome," with specific product codes 5059340008929 and 5059340008936, corresponding to V41020 BX220IM.
Function Description:
The device is a pack of tracks and profiles designed for sliding doors, intended for domestic use. It facilitates the smooth operation of sliding doors on furniture, such as wardrobes or cabinets, providing an aesthetic and functional closure system. The assembly instructions detail how to install the top and bottom tracks, as well as the door profiles and rollers, to create a complete sliding door unit.
Important Technical Specifications:
The manual does not explicitly list detailed technical specifications like material composition, weight capacity, or specific dimensions of the tracks and profiles. However, it implies certain requirements through the assembly process:
- Tools: Requires a drill (5mm and 10mm drill bits), screwdriver, and possibly a wrench (10mm).
- Space for Assembly: A clean, dry area with sufficient space is required for furniture assembly.
- Door Thickness/Clearance: The assembly steps show specific measurements for installation, such as ">30 cm" and "<30 cm" clearances for certain parts (Page 17), and a "min. 30mm" measurement related to door installation (Page 29).
- Fasteners: Various screws and bolts are used, indicated by part numbers and quantities (e.g., [03] x6, [04] x1, [05] x4, [06] x4, [10] x2, [11] x4, [12] x6 on Page 16; [16] x16, [18] x48, [19] x6, [20] x16, [21] x2, [22] x1, [23] x1, [24] x2 on Page 27).
- Roller System: The design incorporates rollers and guides for the sliding mechanism, ensuring smooth movement of the doors.
- Locking Mechanism: Some components suggest a locking or securing mechanism for the doors (e.g., the padlock symbol on Page 34 and 43, and the "12 mm" adjustment on Page 49).
Usage Features:
- Domestic Use: The product is designed exclusively for household environments.
- Sliding Mechanism: Provides a space-saving and convenient way to open and close wardrobe or cabinet doors.
- Adjustability: The assembly process includes steps for adjusting the doors, indicated by the "12 mm" adjustment on Page 49, allowing for fine-tuning of door alignment and operation.
- Safety with Glass/Mirror Doors: Specific warnings are provided for doors containing glass or mirrors, emphasizing careful handling during installation to prevent injury or damage. Users are advised not to place very hot or cold items against the glass, strike it with hard objects, attempt to cut or drill it, sit or stand on glass surfaces, and to stop using the product if the glass is chipped or broken.
- Secure Installation: Emphasizes the importance of ensuring all components and fixings are securely in place before use to prevent accidents.
Maintenance Features:
- Cleaning:
- Furniture Surfaces: Clean with a soft, dry cloth.
- Mirror/Glass Surfaces: Clean with a soft, damp cloth.
- Spills: Immediately wipe up any spills or splashes to prevent standing water on the furniture.
- Prohibited Cleaners: Do not use solvents, scourers, abrasives, bleach, acids, strong detergents, aggressive chemical cleaners, or solvent-type cleaning solutions.
- Regular Checking:
- Periodically check all components and fixings to ensure they are secure.
- Discontinue use if there are any doubts about the product's fitness for purpose.
Safety Warnings and Guidelines:
- Read Instructions: Users must carefully read and fully understand all safety warnings and instructions before handling or using the product.
- Competent Installation: Installation must be performed by a competent person, strictly following the manufacturer's instructions. Incorrect installation can lead to danger, injury, or property damage.
- Small Parts Hazard: Some parts can be hazardous to small children. Keep all parts out of reach of children and do not leave children unattended in the assembly area.
- Prevent Climbing: Children should be prevented from climbing or hanging on drawers, doors, or shelves.
- Power Tools: The use of power screwdrivers is not recommended for assembly.
- Screw Installation: Ensure screws are accurately placed into pre-drilled pilot holes and avoid overtightening.
- Consultation: If in doubt about installation, consult a technically competent person.
- Secure Fitting: Always ensure the product is securely fitted before use.
- Children and Product: Do not let children play with the product.
Guarantee:
- Duration: The product comes with a 15-year manufacturer's guarantee against manufacturing defects.
- Coverage: Applies to normal household use (non-professional or commercial).
- Claim Requirements: Proof of purchase (sales receipt, invoice, etc.) is required for a claim. The product must be new; the guarantee does not cover second-hand or display products.
- Replacement Products: Any replacement product is guaranteed only until the expiry of the original guarantee period.
- Conditions: The guarantee covers failures and malfunctions if the product was used for its intended purpose and installed, cleaned, cared for, and maintained according to the manual and standard practices.
- Exclusions: Does not cover defects or damage from normal wear and tear, improper use, faulty installation/assembly, neglect, accident, misuse, or modification. It also excludes ancillary costs (shipping, labour, etc.) and direct/indirect damages unless otherwise stated by law.
- Remedy: In case of a defective product, the manufacturer will provide spare parts or proceed with partial or complete replacement within a reasonable time.
- Legal Rights: The guarantee is in addition to and does not affect statutory rights.
- Country Specifics: Rights are enforceable in the country of purchase. Specific legal conformity guarantees are mentioned for France and Poland, and a guarantee certificate for Turkey and Romania.
Need help?
General
To Next Page