To Next PageTo Next Page
Need help?Do you have a question about the GoodHome atomia 5036581053291 and is the answer not in the manual?
This document provides comprehensive information regarding the "atomia" storage unit, covering its function, technical specifications, usage, and maintenance.
The atomia storage unit is designed for domestic use, offering a versatile storage solution. It consists of modular components that can be assembled to create various configurations, including floor-standing and wall-mounted units. The product is intended to provide organized storage within a household setting. The assembly process involves securing various panels and components using screws and other fixings. Depending on the specific model (indicated by different product codes), the unit can vary in height and width, accommodating different storage needs. The inclusion of wall anchoring devices for both floor-standing and hung furniture emphasizes its primary function of safe and stable storage, preventing tipping or falling. The product is designed with an emphasis on durability and aesthetic appeal, integrating into various home décors.
The manual provides a list of product codes, each corresponding to a specific configuration or component of the atomia storage unit. These codes are:
The assembly instructions refer to specific parts using numerical identifiers (e.g., [01], [02], [03], [04]) and alphabetical identifiers for hardware components (e.g., [A], [B], [C], [D], [E], [F], [G], [H], [I], [L], [M], [N], [O]). The dimensions of the units are indicated in the assembly steps, with specific references to heights such as 187.5 cm and 225 cm, and widths such as 75 cm and 100 cm, for different models (e.g., 1875x750, 1875x1000, 2250x750, 2250x1000). The product is designed for installation in rooms with a minimum ceiling height, with visual cues indicating suitability for heights >2400mm and <2400mm. The connection screw for wall hangers is a key component for securing the unit to the wall. The product is covered by a 15-year manufacturer's guarantee against manufacturing defects for normal household use.
The atomia storage unit is designed for straightforward assembly, though it requires careful attention to the manufacturer's instructions. Users are advised to ensure all parts are present before starting and to have the right tools, sufficient space, and a clean, dry area for assembly. It is crucial to avoid hidden service pipes and cables when drilling. The use of power screwdrivers is not recommended, and screws should always be precisely located in pre-drilled pilot holes without overtightening. For safety, the unit must always be used on firm, level ground, with all legs in contact with the surface. Regular structural checks are recommended to ensure its fitness for purpose, and it should not be used if any doubts arise. Children should not be allowed to play with the product. For wall-mounted or hung furniture, it is essential to check the solidity of the wall/ceiling and use appropriate fixing devices suitable for the specific wall materials in the home, as these are not included with the product. The manual emphasizes that installation must be performed by a competent person to prevent injury or property damage. The product includes anchoring devices to prevent tipping or falling, which must be used as instructed.
Maintaining the atomia storage unit is simple and involves basic cleaning and regular checks. For cleaning, a soft, dry cloth should be used on the furniture's surface. It is important to immediately wipe up any spills or splashes to prevent water from standing on the furniture. The use of harsh cleaning agents is strictly prohibited. This includes solvents, scourers, abrasives, bleach, acids, strong detergents, aggressive chemical cleaners, or solvent-type cleaning solutions, as these can damage the product's finish and integrity. Regular checking of all components and fixings is essential to ensure they remain secure. If any doubts about the product's fitness for purpose arise during these checks, it should not be used. The 15-year guarantee covers product failures and malfunctions, provided the product has been used, installed, cleaned, cared for, and maintained according to the instructions in the user manual and standard practice. The guarantee does not cover normal wear and tear, damage from improper use, faulty installation, neglect, accidents, misuse, or modifications to the product. Users are advised to retain their proof of purchase for guarantee claims.
General| Brand | GoodHome |
|---|---|
| Model | atomia 5036581053291 |
| Category | Indoor Furnishing |
| Language | English |
