To Next PageTo Next Page
Need help?Do you have a question about the Goodman ASAS-10ASC and is the answer not in the manual?
General| Brand | Goodman |
|---|---|
| Model | ASAS-10ASC |
| Category | Air Cleaner |
| Language | English |
Explains particle removal, lists advantages, and details the electrostatic precipitation principle.
Guidance on selecting the best location and step-by-step physical installation.
Instructions for electrical connections, emphasizing safety and compliance with codes.
Procedures to verify proper operation after installation and component replacement.
Steps for proper operation, including continuous fan use and clear airflow paths.
Explanation of 'clean dust' phenomenon and how to minimize it.
Importance of scheduled maintenance for optimal performance.
Methods to test the APS sensor and its impact on power board operation.
Step-by-step guide for replacing the Air Proving Switch.
Procedure for measuring and verifying high voltage output from the power board.
Instructions for removing and replacing the indicator light.
Detailed steps for disconnecting, removing, and installing a new power board.
Procedure to test the 24V transformer and check power board input resistance.
How to test and adjust power board voltage using a high voltage meter.
Procedure to measure voltage at the collecting cells and troubleshoot contacts.
Method for approximate voltage adjustment when a meter is unavailable.
Diagnosing bad contacts within the collecting cells.
Steps for safely removing the power box from the cabinet.
Procedure for removing the high voltage contact tray and its components.
Detailed instructions for replacing broken ionizing wires.
