To Next PageTo Next Page
Need help?Do you have a question about the Goodman ComfortNet ASXC160481BD and is the answer not in the manual?
General| Model | ASXC160481BD |
|---|---|
| Type | Heat Pump |
| Brand | Goodman |
| Series | ComfortNet |
| Cooling Capacity (BTU) | 48000 |
| Cooling Capacity (ton) | 4 |
| SEER Rating | 16 |
| HSPF Rating | Up to 9.5 |
| Heating Capacity (BTU/H) | 48000 |
| Refrigerant | R-410A |
| Compressor Type | Two-stage |
| Stages | 2 |
| Voltage | 208/230 |
| Phase | 1 |
| Warranty | 10-Year Parts Limited Warranty |
| Sound Level (dBA) | 72 |
Guidelines for safe refrigerant handling and EPA compliance.
Explains the design, components, and operation of condensing units.
Describes the UC PCB's function, features, and diagnostics.
Details the cooling cycle, thermostat interaction, and component operation.
Details the heating cycle, thermostat interaction, and component operation.
Provides a chart for diagnosing cooling and heat pump system issues.
Covers voltage, wiring, thermostat setup, and network troubleshooting.
Details advanced features, menus, and diagnostic access for ComfortNet systems.
Guides network troubleshooting using LEDs and the learn button.
Lists specific error codes and corrective actions for PCBJA101/102 air handlers.
Lists error codes for PCBJA104 air handlers, including electric heat faults.
Procedures for checking time delay relays, contactors, and voltage.
Details diagnostic codes for common faults like low/high side issues and lockouts.
Lists specific fault codes for sensor errors, fuses, and blower motor problems.
Covers further diagnostic codes related to data, system mismatches, and blower motor issues.
Troubleshooting steps for compressor issues.
Procedures for checking compressor resistance, ground, and operation.
Procedures for leak testing, system evacuation, and refrigerant charging.
Covers checking compressor efficiency and diagnosing expansion valve problems.
Explains how to check and adjust superheat and subcooling levels.
Details troubleshooting for expansion valves, restricted liquid lines, and refrigerant charge.
