Operation4
4.1 Power
Plug the AC/DC power adapter (included) into a standard wall
outlet and the DC power input on the rear of the unit. After
connecting power, please allow approximately 5 seconds to pass
before powering the unit ON.
4.2 Projector Placement
For best results, place the projector in a dark room or other dimly
lit area. Use the unit with a dedicated projector screen for best
picture resolution. If placing the projector behind the viewing
screen (unit in front of/projecting toward viewers), a special screen
will be required. Projector screens are not included. If you are not
using the unit with a screen, a smooth, white or lightly colored
surface will provide the best results.
THE CENTER
OF LENS
72
"
60
"
50
"
45
"
37
"
The projector can
display up to 150"
To Next Page