4
Lure Taster installation
1.
Choose up to 6 locations
Your kit comes with 6 Lure Taster cards and pins, so
you can choose up to 6 locations around your property
to install them. Choose spots near where you have your
trap - roughly 20 ft apart.
2.
Fold the Lure Taster in half
Fold the Lure Taster in half with the orange side facing
out. You should see the lure squeezing out when you
do this.
3.
Pin the Lure Taster to your surface
Secure the Lure Taster 5” o the ground, loose enough
to allow room for the rodent to get their mouth around
the card.
4.
Check after 3 nights
If your cards show any sign of rodent activity, that
means they feel safe enough to stop for some food,
which is exactly where you should install your A24.
To Next Page
Loading...
