GOODRICH Stormscope Series II

Need help?

Do you have a question about the GOODRICH Stormscope Series II and is the answer not in the manual?

Summary

Chapter 1: GENERAL INFORMATION

1.1 INTRODUCTION

Provides an overview of the WX-950 system, its purpose, and features.

1.2 FUNCTIONAL DESCRIPTION

Explains the WX-950's function as a TSO certified thunderstorm mapping system.

1.3 PHYSICAL DESCRIPTION

Details the physical characteristics and dimensions of the WX-950 display/processor and antenna.

1.4 SPECIFICATIONS

Lists the technical specifications for size, weight, temperature, altitude, power, and compliance.

1.5 INTERFACE

Refers to Appendix A for electrical characteristics of input/output signals.

1.6 EQUIPMENT REQUIRED NOT SUPPLIED

Lists essential equipment not included with the WX-950 system for installation.

1.7 INSTALLATION APPROVAL

Outlines the process for obtaining FAA approval for system installation.

1.8 WARRANTY INFORMATION

Details the warranty terms and conditions for the WX-950 system.

Chapter 2: INSTALLATION

2.1 INTRODUCTION

States that installation must be by qualified personnel and provides the installation steps.

2.2 UNPACKING AND INSPECTING

Provides instructions for carefully unpacking and inspecting the system components for damage.

2.3 PRE-INSTALLATION TEST PROCEDURE

Recommends testing components upon receipt to verify operation and detect shipping damage.

2.4 ΑΝΤΕNNA LOCATION

Discusses critical factors for selecting an interference-free antenna location.

2.5 ΑΝΤΕNNA AND DOUBLER INSTALLATION

Details the procedure for mounting the antenna and doubler plate to the aircraft.

2.6 DISPLAY;PROCESSOR LOCATION

Guides on selecting an accessible and visible location for the display/processor.

2.7 CABLE REQUIREMENTS AND FABRICATION

Outlines general cable requirements and specific details for various system cables.

2.8 MATING CONNECTOR ASSEMBLY

Explains the mating connector assembly and its role in system configuration and connection.

2.9 DISPLAY;PROCESSOR INSTALLATION

Describes how to mount the display/processor into a standard 3 ATI instrument panel cutout.

2.10 PERFORMANCE TEST

Refers to Chapter 3 for post-installation checkout procedures.

Chapter 3: INSTALLATION CHECKOUT

3.1 INTRODUCTION

Provides instructions for post-installation checkout of the WX-950 system.

3.2 CONTROLS

Locates and describes the operating controls on the front of the indicator.

3.3 POST INSTALLATION CHECKOUT

Details the step-by-step procedure to validate the installation and return to service.

CHAPTER 4 MAINTENANCE

4.1 INTRODUCTION

Outlines maintenance procedures for testing and fault isolation of the WX-950 system.

4.2 CONTINUED AIRWORTHINESS

States that no scheduled maintenance is required for continued airworthiness.

4.3 PERIODIC MAINTENANCE

Recommends an annual checkout of the system for customers.

4.4 SERVICE MENU

Explains the Service Menu's purpose for installation, testing, and troubleshooting.

4.5 FAULT ISOLATION

Guides on diagnosing and resolving system problems indicated by error messages.

4.6 TROUBLESHOOTING ELECTRICAL NOISE

Provides procedures to identify and resolve electrical noise interference issues.

4.7 FUSE REPLACEMENT

Details the steps for replacing the internal fuse in the WX-950 unit.

4.8 RETURN TO SERVICE CHECK

Instructs to perform post-installation checkout after repairs and reinstallation.

4.9 DISPOSITION OF FAILED ITEMS

Provides instructions for packing and returning defective components.

APPENDIX A WX-950 INTERFACE SIGNAL & CABLE CHARACTERISTICS

INTRODUCTION

Defines electrical characteristics of signals and their compatibility with ARINC specifications.

SIGNAL CHARACTERISTICS

Details signal characteristics and connection information for antenna I/O.