Need help?Do you have a question about the Goodway GLS-150 and is the answer not in the manual?
General| Brand | Goodway |
|---|---|
| Model | GLS-150 |
| Category | Turning Centers |
| Language | English |
30° slant-bed design for smooth chip disposal and easy access.
Live tooling and C-axis enable multi-tasking: turning, milling, drilling, tapping.
Y-axis models combine machining center capabilities with built-in turning.
One-piece casting with low center of gravity for a rigid foundation.
FEM optimized ribbing structure cast into the one-piece bed.
One-piece casting headstock with heat dispensing fins and rigid tapping.
Direct belt drive for enhanced spindle control, flexibility, and serviceability.
Detailed spindle dimensions and P4 grade super-high precision bearings.
Table showing acceleration and deceleration times for the GLS-150 spindle.
Graphs illustrating spindle motor torque and output power curves.
Servo motor indexing system provides 0.2 sec indexing time.
10 or 12-station turrets clearing 6" to 8" diameter work holding devices.
Diagrams illustrating standard and optional turret tooling systems.
Diagram illustrating the work range and dimensions of the machine.
Features adjustable quill pressure and programmable movement.
Uses servo motor for positioning and pressure control, programmable.
Enables turning, milling, drilling, and tapping in a single setup.
Details stations, indexing, torque, and tool holder compatibility.
Illustrates tool holder configurations for live tooling.
Improves precision for grooving and off-center drilling.
Features 70 mm (±35 mm) Y-axis travel for versatile machining.
Y-axis control produces grooves with higher accuracy.
Details drilling, milling, tapping capabilities and multi-tasking functions.
Examples of various work-pieces machined by the GLS series.
Includes critical testing, ISO 9001 compliance, and extended test runs.
Utilizes top-end equipment like ZEISS 3D systems and BL balancers.
Features adjustable chip conveyor timers and a roll-out coolant tank.
Optional Renishaw tool setter and load monitoring for tool life.
Details standard and optional features for spindle, work holding, and turret systems.
Covers coolant systems, chip conveyors, automated operation support, and safety features.
Lists available Fanuc control functions, display options, and memory specifications.
Fully automated systems for long shaft loading and unloading.
Standardized or custom gantry systems for flexible automation.
Comparison of BF-65 and BF-80 bar feeder models, capacities, and controls.
Illustrates the bar feeding process and optional parts catchers/conveyors.
Diagram showing the overall floor space requirements of the machine.
Detailed measurements (A-F) of the machine layout with and without chip conveyor.
Details on leveling pads, bolts, nuts, and concrete requirements.
Guidance for lifting the machine using forklifts or overhead cranes.
Specifications for machine capacity, swing diameter, and spindle details.
Details optional built-in spindle motors, Cs-axis drive, and spindle indexing accuracy.
Information on X and Z axis travel, rapid traverse, slide way type, and servo motors.
Specifications for turret stations, live tooling, Y-axis travel, and X/Y axes rapids.
Details on tailstock, CNC control, machine weight, and overall dimensions.
To Next Page
