Need help?Do you have a question about the Goodway GLS-200 and is the answer not in the manual?
Enables multi-tasking (milling, drilling) in one setup, saving time and accuracy.
Mimics machining centers with built-in turning, saving costs and space.
Eliminates belts/pulleys for faster response, reduced vibration, and lower maintenance.
0.2 sec indexing with curvic couplings for enhanced tool accuracy and rigidity.
Enables milling, drilling, tapping in one setup, saving time and accuracy.
0.2s adjacent, 0.5s opposite end indexing via advanced servo technology.
Provides ample torque and power for tackling tough live tooling jobs.
Improves precision, enabling grooving and off-center drilling.
70 mm (±35 mm) travel for efficient machining of a wide variety of parts.
Grooving with Y-axis control produces grooves with higher accuracy.
Illustrates turning, drilling, tapping, keyway milling, and contour milling in one setup.
Includes actual cutting and laser inspection for quality assurance.
Machines are built to strict factory ISO 9001 quality control regulations.
Utilizes ZEISS 3D systems and BL dynamic balancers for top component precision.
All machines undergo preprogrammed test runs of 100 hours or more before shipment.
Motorized arm and auto tool check for efficient tool touch-off.
Detects abnormal tool loads and stops the machine to prevent damage.
Includes fully enclosed guarding, door interlocks, and viewing windows.
Custom systems for long shaft loading/unloading with CNC turning centers.
Standardized or custom gantry systems for automatic chucking operations.
Instructions and dimensions for safely lifting the machine with a forklift.
Guidelines for lifting the machine using an overhead crane and slings.
General| Brand | Goodway |
|---|---|
| Model | GLS-200 |
| Category | Turning Centers |
| Language | English |
To Next Page
