User Manual
Manufacturer: GOOFF B.V.
Address: Hooglandse Jaagpad 8, 3434 NV Nieuwegein, The Netherlands
Helm Model: PILOT
This helmet is certified
- EN1078:2012+A1:2012 in accordance with EHSR or regulation (EU)
2016/425.
- S-Epac (NTA 8776)
EU type survey conducted by Kiwa Telefication BV (NB0063).
The notification body for CE EN1078 and NTA8776 approval is Kiwa Telefication
B.V. (NB 0063).
Introduction
This helmet is designed for use on speed pedelec bicycles, mopeds and light
mopeds with a blue license plate. Proper use and maintenance is crucial to
provide protection. The fit determines whether the helmet is suitable for use on
your head.
Warning
1. No helmet can protect against all kinds of hazards. In particular, this helmet
offers no protection against neck injuries.
2. The helmet must fit and feel safe and comfortable on the head. This means
no pressure points, freedom of movement or straps that run over the ear.
3. The helmet is no longer usable after any kind of shock, blow or fall and will
no longer provide sufficient protection. This damage may also not be visible from
the outside. In the event of any damage, the helmet must be returned to the
manufacturer for repair or destruction. The helmet and/or paint can also be
damaged by commonly used substances such as ammonia, bleach, petrol, oil.
This too may not be visible to the naked eye by the user.
4. Do not modify the helmet with any kind of modification, addition or removal.
This reduces protection as designed.
5. We recommend not using the helmet for longer than 2 years and require an
annual inspection by the supplier.
6. 1. If you have a fluorescent helmet, always store it in a helmet cover to
prevent discolouration.
To Next Page
Loading...