Visor instructions
Visor model: MV-001
The visor is in accordance with the standards of EN166:2001. It is designed for
use on bicycles or mopeds to protect from sunlight. The maximum service life
is 2 years and must be replaced immediately if damaged.
Visor marketing
Yoloon Code of manufacturer
5-2,5 Code number and obfuscation number
1 Optical class 1, suitable for long-term use under normal conditions.
S Reinforced rigidity, 43g ball impact at 5.1m/s
EN166:2001 Applicable test standard
CE marking
Warning
1. Damaged or scratched visors must be replaced immediately.
2. Fast particulate eye protectors worn over standard ophthalmic spectacles
can transmit shocks, posing a hazard to the wearer.
3. Only clean the visor with a soft cloth, do not use bare hands, nails or other
materials such as a jacket sleeve.
4. The visor is mounted by and on the spot of the 3 magnets. When not in use,
store in a soft cloth bag or case.
5. Materials that come into contact with the user's skin may cause allergic
reactions in sensitive people.
To Next Page
Loading...