8 9
3.4 Stylus and Eraser Operation
This Jamboard display is equipped with a touch-sensitive screen and supports the use of the Jamboard stylus or eraser. You can
touch the pictures or words on the Jamboard touch-display gently with the Jamboard accessories, and the Jamboard will react.
The following description illustrate some typical touch operation behavior. For further detail on how to run the touch operation,
please refer to the on screen instruction.
Write Erase
Use the stylus to write
anywhere on the screen.
The stylus is pressure
sensitive and changes
depending on how hard
you press on the screen.
Use the eraser (microfiber side
down) to erase marks and
gestures on the screen.
NOTES:
• Avoid scratching with sharp object on the touch-display. Only fingertips and the Jamboard accessories are allowed for touch control.
• Avoid intensive light, spotlight, or wide-spread light from direct beaming on the screen.
• Avoid installation location close to the windows or glass-doors as the direct sunlight may affect the touch-control performance.
Flick Zoom In
Touch the target on the screen
with one fingertip and brush
the surface quickly.
Touch the target on the screen
with two fingertips held together
and move them apart to zoom
in (magnify) the screen image.
Zoom Out Touch and Hold
Touch the target on the screen
with two fingertips stretched
apart and move them closer to
zoom out (shrink) the screen
image.
Touch and hold the target on
the screen with one fingertip
for a while to display a context
menu or options page for an
item.
To Next Page
Loading...
Need help?
General