Google Nest Cam IQ outdoor - Nest Cam IQ Outdoor Installation

2019 | Condential and Proprietary | Do not distribute
NEST CAM OUTDOOR IQ INSTALLATION
When you’re ready to install you can remove the black foam pad between the wall plate and the camera. Go ahead
and leave the lens sticker on until you’re nished installing the Nest cam.
Tools you’ll need
Camera Wall plate 12 Nest screws
Outdoor power cable (25 ) 8 cable clips 12 wall anchors
Indoor power adapter Hex key Power cable strap
● If you used a drill to put in the screws, hand tighten them with a screwdriver. This will ensure a
secure installation and help prevent over-tightening and possible damage to walls or ceiling.
● Stick the Nest Cam to the mounting plate. The rare eah magnet will hold the Nest Cam
securely, even if you install it on the ceiling.
Impoant: The rare eah magnet is very strong. Make sure to watch your ngers when aaching
the mounting plate to avoid injury.
● Check the camera’s video stream on the Nest app and adjust the position if needed.