2019 | Condential and Proprietary | Do not distribute
● Install the power adapter
We recommend installing the adapter at least 18 inches (50
cm) above the ground in case of ooding or deep snow. We
included the adapter wall plate for this purpose.
Place the adapter plate with the at side facing the wall. Drill
a hole and inse a wall anchor if needed. Use one of the
screws to mount the plate.
Then snap the adapter on.
● Install the rest of the cable clips
Install the second cable clip close to where the USB ring
connects to the power adapter.
Install the third clip close to the outlet so that the cable
will be harder to unplug.
Install as many of the other clips as you need to route
the cable from the camera to the outlet..
Finish up
Remove the sticker on the lens if you haven't already. Wipe o any dust or di with a so lint-free cloth
Customers can paint the cable and the clips to match their home. They should not paint the camera as it can aect
peormance and void the warranty.
To Next Page
Loading...