Green LED (solid)
Red LED
Green LED (blinks)
LED Indicator
The connection is correct, you can start the vehicle directly.
Reverse connection, please correct the polarity of battery clamps.
Operation
Check the LED indicator on the jumper cable and follow the instructions as below:
If any problem persists, stop using the jump starter and contact our service team directly
at support.eu@gooloo.com, we will do our best to solve the problem within 24 hours.
The vehicle battery voltage is too low, try to press “BOOST” button on the
jumper cable, when Green LED illuminates (solid), then start the vehicle
within 30s.
The vehicle battery may be damaged, first of all, make sure the correct
connection, try to press “BOOST” button on the jumper cable, when Green
LED illuminates (solid), then start the vehicle within 30s.
No Light
5
To Next Page
Loading...
