What to do if my Goorui Blower does not start?
If your Goorui Blower doesn't start, here's what you should do: * Check the fuses, terminals, and power supply cables to ensure that at least two power supply leads are not interrupted. * Verify the power supply to make sure the motor is receiving the correct voltage. * If the above steps don't resolve the issue, the motor may be defective, requiring repair.
What to do if my Goorui Blower does not start and makes a humming noise?
If your Goorui Blower doesn't start but makes a humming noise, it could be due to several reasons: 1. **Interrupted Power Supply:** Check the fuses, terminals, and power supply cables to ensure that one power supply lead is not interrupted. 2. **Defective Impeller:** The impeller might be defective and needs replacement. 3. **Jammed Impeller:** Open the cover and remove any foreign objects that may be causing the impeller to jam. Clean the area thoroughly. 4. **Impeller Gap:** Check the impeller gap. 5. **Defective Bearing:** The bearing on either the motor side or the machine side could be defective and needs replacement.
Explains the impulse principle of operation and energy conversion without lubrication.
Details the intended use for suction/compression of dry, non-aggressive gases and environmental conditions.
Lists and describes optional accessories such as pressure relief valve, inlet filter, and silencer.
Specifies environmental and mounting requirements for proper machine installation.
Provides guidelines for connecting suction and discharge lines to ensure proper flow and prevent stress.
Details safety precautions and procedures for making electrical connections.
Provides recommended intervals and tasks for monthly, 6-monthly, yearly, and 5-yearly maintenance.
Instructions on how to clean ventilation grilles and cooling fins to maintain performance.
Instructions for safely dismantling, disposing of waste, and handling the machine as scrap metal.
To Next Page
General