GoPlus BA7785 - Assembly

04 05
Rotating the shower
head as you want,
360° Swiveling
1. Take down the old shower head
2. Install the diverter onto the shower arm, use the teflon
tap if needed. Use wrench to make it tight.
3. Screw the upper tube onto the diverter. The upper
tube could be flexible.
4. Install the shower head onto the upper tube.
Angle could
be fixed
Checking the washer
inside the nut first
Checking the washer
inside the nut first
Checking the washer
inside the nut first
Assembly
EN