16
USING YOUR HERO3+: CAMERA MODES
BURST PHOTO
In
Burst Photo
mode your camera takes multiple photos in short time intervals—
3 photos /1 second, 5 photos /1 second and 10 photos /1 second.
To capture a Burst Photo series, verify the camera is in Burst Photo mode.
If the Burst Photo icon on your camera’s LCD screen is not showing,
press the Power/Mode Button repeatedly until it appears.
To take a
Burst Photo
series:
Press the Shutter/Select Button
. The red Camera Status Lights flash
and the camera beeps multiple times.
▶See BURST PHOTO for instructions on how to change the interval settings.
To Next Page
Loading...
