AVOIDING WATER AND WET ENVIRONMENTS
WHEN NOT IN HOUSING
When not protected in the waterhousing, do not use the LCD
BacPac in rain, or near washbasins or other wet locations.
Take care not to spill any food or liquid on the LCD BacPac.
In case the LCD BacPac gets wet, turn o and unplug from
camera before cleaning, and allow it to dry thoroughly
before using again. Do not attempt to dry the LCD BacPac
with an external heat source, such as a microwave oven or
hair dryer. Damage to the LCD BacPac caused by contact
with liquid is not covered under the warranty.
USING CONNECTORS AND PORTS
Never force a connector into a port. Check for obstruc-
tions on the port. If the connector and port don’t join with
reasonable ease, they probably don’t match. Make sure
that the connector matches the port and that you have
positioned the connector correctly in relation to the port.
KEEPING THE LCD BACPAC WITHIN
ACCEPTABLE TEMPERATURES
The LCD BacPac is designed to be operated in tempera-
tures between 0° C and 40° C and stored in temperatures
between 0° C and 50° C. Low-or high-temperature condi-
tions might temporarily shorten battery life or cause the
LCD BacPac to temporarily stop working properly. Avoid
dramatic changes in temperature or humidity when using
the LCD BacPac as condensation may form on or within
the LCD BacPac. When you’re using the LCD BacPac
or charging the battery, it is normal for the LCD BacPac
to get warm. The exterior of the LCD BacPac functions
as a cooling surface that transfers heat from inside the
unit to the cooler air outside.
10
To Next Page
Loading...
Need help?
General
