CONNECTING
REMO
+YOUR
CAMERA
STEP
1
Turn on
wireless
on your camera.
Fo
r
details,
see
the
user
manual for your camera.
STEP
2
Power on both devices
to
connect them. The wireless
status
light on Remo blinks slowly (blue).
Note:
You
do
not
need to turn on your camera's Voice Control feature to use Remo.
If
the connection
to
the
camera
is
lost.
Remo emits a disconnection beep and
the
wireless
status
light
blinks quickly. For best
results,
be sure
that
your camera and Remo are not blocked
by
walls or other obstacles.
CONTROLLING YOUR CAMERA
To
control
your camera with your voice. use the commands
listed
on
the
next page. Remo has a range
of
33ft
I
10m
and
is
waterproof
to
16ft
I
5m.
Note: Voice Control performance may be impacted by distance
or
significant wind
and
noisy conditions. Keep the
product
clean and clear
of
debris.
STEP
1
Power on Remo.
~
3
sec
11
11
1111
11
STEP 2
While
facing Remo.
say
a command from the
list
on
the next
page. Remo vibrates, beeps, and blinks
when the command
is
understood.
)
~.J
PRO TIP:
With Remo, you can say any command at any time.
For example, if
the
camera
is
in
Video mode and you want
to
capture burst photos. just
say
"GoPro shoot
burst."
To Next Page
Loading...
