What to do if my Gorenje BPC2B is making abnormal noises?
If your Gorenje Blender is making abnormal noises, first ensure the jug is correctly placed. If the noise persists, ingredients might be sticking to the jug wall, causing the blade to spin idly. Try scraping the ingredients from the jug walls and add more water if needed. If the problem continues, replace the jug. If all else fails, it indicates internal components may have failed.
Why is the blade on my Gorenje BPC2B not spinning?
If your Gorenje Blender blade isn't spinning after switching it on, it could be due to overloading the jug with too many ingredients, which activates the overload protection. Try reducing the amount of ingredients and decreasing the blending speed. If this doesn't resolve the issue, it may indicate that internal components have failed.
Why does my Gorenje BPC2B Blender have a strange smell?
A strange smell during the first few uses of your Gorenje Blender is normal. This smell should disappear after the appliance has been used a few times. If the smell persists, it may indicate internal component failure.
What to do if the Gorenje Mixer blade does not spin?
If your Gorenje Mixer's blade isn't spinning, it might be due to a few reasons. First, you may have overloaded the jug with too many ingredients, activating the overload protection. Try reducing the amount of ingredients. Also, check if the blending speed is set too high and reduce it. If neither of these steps works, it could indicate a failure in the internal components, in which case you should contact Gorenje's customer service.
Why is my Gorenje Mixer making abnormal noise?
Abnormal noise during Gorenje Mixer operation can occur if the jug is not correctly placed; ensure you replace the jug correctly. Also, ingredients might be sticking to the jug wall, causing the blade to spin idly. Scrape the ingredients from the jug walls and add more water if necessary. If the issue persists, it could be due to failed internal components, and you should contact Gorenje's customer service.
Why does my Gorenje Mixer have a strange smell?
A strange smell during the operation of your Gorenje Mixer is normal during the first few uses. This smell should disappear after using the appliance a few times. However, if the smell persists, it could indicate a failure in the internal components, and you should contact Gorenje's customer service.
Key instructions and advice for initial appliance use and reference.
Critical safety information and potential hazards to be aware of.
Details critical dangers, essential precautions, and safe operation guidelines.
Steps required before the first use of the appliance.
Guidance on how to assemble and disassemble the blender.
Instructions for operating the appliance, including preset programs.
Detailed instructions and warnings for cleaning the appliance.
Solutions for common problems encountered during appliance operation.
Information on the proper disposal of the appliance according to regulations.
Details on warranty coverage and how to contact customer service for repairs.
To Next Page
General
