To Next PageTo Next Page
Need help?Do you have a question about the Gorenje IMC 1200S and is the answer not in the manual?
General| Model | IMC 1200S |
|---|---|
| Ice making capacity per 24h | 12 kg |
| Water tank capacity | 2.2 L |
| Indicator for low water level | Yes |
| Indicator for full ice container | Yes |
| Power Consumption | 120 W |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Weight | 10 kg |
| Color | Silver |
| Gross weight | 11 kg |
| Ice cube size | Small |
Overview of the ice maker's components, including rear wall, front panel, water tank, and control panel.
Read manual before first use and save warranty statement. Ensure appliance rests for 2 hours before connection.
Check voltage, plug, cord for damage. Use only authorized parts. Supervise children and persons with reduced capabilities.
Ensure proper ventilation, avoid heat sources, direct sunlight, and humidity. Do not use outdoors or with non-original parts.
Remove packaging, clean appliance as instructed, and fill water tank with clean water up to MAX.
Discard ice from the first two cycles for hygienic reasons. Use room temperature water.
Indicator flashes in standby. Press POWER to start. Press again to return to standby.
Use SELECT button to choose between small (S) and large (L) ice cubes.
ICE FULL indicator lights up when the basket is full. Appliance switches to standby.
ADD WATER indicator lights up when water is low. Restart by adding water and pressing POWER.
Stop operation, disconnect. Clean with a soft damp cloth. Do not use abrasive cleaners or submerge in water.
Clean ice basket with lukewarm water and detergent. Empty water tank via drain plug.
Check power supply, connection, or internal components. Contact customer service if needed.
Remove ice from basket. Check internal components if problem persists. Contact customer service.
Add water to MAX. Check internal components if problem persists. Contact customer service.
Switch to standby, remove blocking ice. Check internal components if problem persists.
