Need help?Do you have a question about the GORMAN-RUPP 03H1-GR and is the answer not in the manual?
General| Model | 03H1-GR |
|---|---|
| Manufacturer | Gorman-Rupp |
| Size | 3 inch |
| Horsepower | 5.5 HP |
| Suction Lift | 25 ft |
| Inlet Size | 3 inch |
| Outlet Size | 3 inch |
| Material | Cast Iron |
| Category | Water Pump |
| Type | Centrifugal |
| Max Flow Rate | 330 GPM |
Defines DANGER, WARNING, CAUTION, and NOTE labels used for safety and clarity.
Details safe methods for lifting pump units to prevent injury and equipment damage.
Warns against operating the pump without guards on moving parts to prevent severe injury.
Covers risks of closed discharge valves, overheating, and handling flammable liquids.
Specifies maximum gearbox RPM and correct rotation direction to avoid damage.
Details checks for pump and gearbox damage, loose hardware, and decals before installation.
Emphasizes the necessity of guards on rotating parts for personnel safety.
Instructions for priming the self-priming pump, including when to add liquid.
Details requirements for grounding the pump to prevent electrostatic build-up.
Maximum liquid temperature and precautions for overheating.
Lists possible causes and remedies for the pump not priming.
Identifies causes and solutions for loss of flow or pressure.
Steps for cleaning, inspecting, and installing new or used seal components.
Details gearbox oil level checks, fill procedures, and recommended oil types and change intervals.
To Next Page
