Need help?Do you have a question about the Gould OS300 and is the answer not in the manual?
Limits liability to servicing/replacing defective parts, excludes collateral damages.
Instructions for returning the unit for service, including packaging.
CRT, vertical, horizontal deflection, and display modes.
Triggering, calibrator, Z modulation, and probe usage.
Power supply, safety standards, temp, dimensions, and weight.
Lists included and available accessories.
General safety warnings, grounding, ventilation, and live parts.
Power connection, obtaining a trace, and setting up Y channels.
Explains display modes, timebase, and X expansion.
Details on trigger controls, sources, slope, and bright line.
Calibrator, ramp output, Z mod, passive probe usage, and camera.
Overview of the oscilloscope's functional blocks.
Signal flow through attenuators, amplifiers, and main blocks.
Explanation of trigger signal path and timebase generation.
How display modes are selected and power is supplied.
Overview of maintenance, calibration, and case removal.
Guide to fault finding, checking voltages, and component tests.
Step-by-step guide for setting up and calibrating the OS300.
Information on ordering parts and component abbreviations.
List of resistors with values, descriptions, and part numbers.
List of capacitors with values, descriptions, and part numbers.
Lists of transistors and diodes with part numbers.
Lists of ICs, inductors, switches, etc.
General| Number of Channels | 2 |
|---|---|
| Vertical Sensitivity | 2 mV/div to 5 V/div |
| Input Coupling | AC, DC, GND |
| Maximum Input Voltage | 400 V (DC + AC peak) |
| Timebase | 0.2 μs/div to 0.5 s/div |
| Trigger Modes | Auto, Normal |
| Display | CRT |
| Vertical Resolution | N/A (Analog Oscilloscope) |
| Input Impedance | 1 MΩ || 20 pF |
| Timebase Range | 0.2 μs/div to 0.5 s/div |
| Display Resolution | N/A (Analog Oscilloscope) |
To Next Page
