Need help?Do you have a question about the Gould 400 Series and is the answer not in the manual?
Details electrical safety, grounding, ventilation, temperature, and power requirements.
Explains the different types of front panel buttons and their operation.
Describes the initial display and information shown upon powering on.
Guides on connecting signals and using the Auto Setup feature.
Explains controls for timebase, position, and magnification.
Covers sensitivity, position, and variable/uncalibrated settings.
Step-by-step instructions for obtaining a trace without Auto Setup.
Common problems and solutions for oscilloscope operation.
Details on selecting trigger sources, coupling, level, slope, and mode.
Features for freezing traces, single-shot, and acquisition status.
Explains the Refreshed, Roll, and X-Y display modes.
How to use datum lines and cursors for measurements.
Operation of the internal colour plotter, pens, paper, and plotting.
Procedures for transferring trace data to/from a computer.
Functionality and settings of the instrument's real-time clock.
Accesses settings for Status, Display/Trigger, Intensity, Reference Trace, RS423, and Special Functions.
Provides access to trace memory, plotting, and waveform processing functions.
Procedure to check the signal rise time.
Method to verify the instrument's bandwidth.
Steps to test trigger sensitivity.
Procedure to check trigger bandwidth.
Instructions for calibrating the timebase.
Steps to calibrate vertical sensitivity and accuracy.
How to use the Max-Min function to detect aliases.
Detailed use of cursors for voltage and time measurements.
Functions for filtering, inverting, and integrating traces.
Performing Add, Subtract, and Multiply operations on traces.
Setting limits and persistence for trace analysis.
Information on the battery unit, its connection, and operation.
How the DSO operates using AC supply via the battery unit.
Process for recharging the instrument's batteries.
Explains alarm lamp indicators and conditions.
Guidelines for operating and storing the unit in various temperatures.
How to operate the DSO independently from the battery unit.
Using external DC voltages to power the DSO.
Information on returning the instrument for servicing and contact details.
General| Brand | Gould |
|---|---|
| Model | 400 Series |
| Category | Test Equipment |
| Language | English |
To Next Page
