08 GoVision User Guide
USER GUIDE
F. HOW TO FORMAT MICROSD CARD
If your GoVision glasses are on and your indicator light stays solid red for
1 minute and shuts off automatically the SD card must be formatted.
WINDOWS
• Go to My Computer
• Go To Removable Disk Drives
• Make sure your cursor is over the drive that holds the GoVision Glasses
(ex: Removable Drive E)
• Right click
• Go to format
• Click on it
• A box will appear asking to format
• Click start
MAC
• Open the Applications Folder
• Select Utilities
• Click on Disk Utilities
• Click on the Untitled Folder on the left pane of disk utilities
• Select quickly
• Click on erase
G.TROUBLESHOOTING
INSUFFICIENT MICROSD CARD STORAGE SPACE
Red light will illuminate solid for 10 seconds and turn off. If this happens, please
move the files off the SD card and store the files into a remote hard drive or on your
computer to free up the SD card storage.
LOW BATTERY
When glasses are not fully charged, the red light indicator will flicker and turn off
within 3 minutes. Please make sure your glasses are fully charged before using.
NO FUNCTION
Please make sure the SD card is properly secured in the SD card slot.
If the glasses stop working for any reason or are not responding, please insert a
small paper clip end into the reset button to restart device. If additional problems
persist, please email us at customerservice@audyglobal.com or call our customer
support line at 617.379.0023
GoVision User Guide 09
To Next Page
Loading...