HOW TO FORMAT MICRO SD CARD
WINDOWS
• Go to My Computer
• Go To Removable Disk Drives
• Make sure your cursor is over the drive that holds the
GoVision Glasses (ex: Removable Drive E)
• Right click
• Go to format
• Click on it
• A box will appear asking to format
• Click start
MAC
• Open the Applications Folder
• Select Utilities
• Click on Disk Utilities
• Click on the Untitled Folder on the left pane of disk utilities
• Select quickly
• Click on erase
BLUETOOTH PARING
Before pairing, please make sure your smart device Bluetooth
setting has been turned on.
Press and hold the Bluetooth Command Button for 5 seconds
to pair your SOL sunglasses with your smart device. The blue
LED will flash alternately until the SOL and your smart device
has connected. “GoVision” will appear in your Bluetooth network
device options, once it appears, please click on the GoVision
network to pair the SOL sunglasses with your smart device. Once
the glasses and your smart device has paired properly, you will
hear the commands, “Paired” and then “Connected”.
You will only need to pair the SOL sunglasses with your smart
device during the initial set up process. Your glasses and smart
device will automatically connect every time you activate the
Bluetooth command.
TURN ON BLUETOOTH CONNECTION
Press and hold the Bluetooth Command Button for 3 seconds to
establish Bluetooth connection. The blue LED will flash and you
will hear the command “Hello”. This command lets you know that
both the SOL sunglasses and your smart device has established
Bluetooth connection. Now the SOL is ready for music listening
and making and receiving phone calls.
POWER OFF BLUETOOTH
Press and hold the Bluetooth Command Button for 5 seconds to
power off and disconnect the Bluetooth connection. You will hear
the command “Goodbye” letting you know that your Bluetooth
connection has been powered off.
BLUETOOTH USER GUIDE
08 GoVision User Guide GoVision User Guide 09
To Next Page
Loading...