The GOSURROUND 900 is a 2.1 soundbar speaker system designed to provide an enhanced audio experience. It includes a soundbar and a subwoofer, along with necessary cables and a remote control.
Function Description:
The GOSURROUND 900 serves as a versatile audio system, capable of connecting to various external audio sources. It supports multiple input modes including Bluetooth (BT), Optical (OPT), HDMI (ARC), USB, and AUX-IN, allowing users to connect devices such as TVs, mobile phones, DVDs, and USB disks. The system provides a total output power of 200W, with dedicated drivers for both the soundbar and the subwoofer to deliver a full range of sound. The remote control offers comprehensive control over the system, including power, volume, input mode selection, playback controls, and sound effect adjustments.
Important Technical Specifications:
- Input: 110-240V AC 50/60Hz
- Output Power: 200W
- Soundbar Drivers: 4 x 2.25"
- Subwoofer Driver: 1 x 6.5"
- Subwoofer Dimensions: W190D310H370 mm
- Soundbar Dimensions: L900D90H79 mm
- Bluetooth Version: 5.0
Usage Features:
- Power On/Off: The system can be powered on or off via the remote control or the button on the soundbar. It enters standby mode when plugged in.
- Input Mode Selection: Users can switch between BT, OPT, HDMI (ARC), USB, and AUX-IN modes using the "INPUT" key on the remote or the corresponding button on the soundbar.
- Bluetooth Connectivity: To pair a Bluetooth device, press the BT button on the remote or soundbar, then search for "GOSURROUND 900" on the BT device. The "PAIR" key on the remote allows for disconnecting and reconnecting Bluetooth.
- HDMI (ARC) Connection: Connect the soundbar to an HDMI (ARC) compatible device using an HDMI cable.
- Optical Connection: Use an optical cable to connect the soundbar to an OPT device.
- AUX-IN Connection: A 3.5mm AUX-IN cable can be used to connect external audio sources like DVDs, mobile phones, or TVs.
- USB Playback: Insert a USB disk into the USB socket for direct playback.
- Volume Control: Adjust volume using the Volume +/- keys on the remote or the +/- buttons on the soundbar.
- Playback Controls: For Bluetooth and USB modes, the remote offers keys for next/previous track and fast forward/backward. A short press on the "RESET" key (or play/pause button) in BT/USB mode pauses/plays.
- Sound Effects: The remote control includes dedicated keys for "MUSIC" (E1), "MOVIE" (E2), "NEWS" (E3), and "3D" (E4) sound effects.
- Tone Adjustment: Users can adjust treble (TREB +/-) and bass (BASS +/-) levels using the remote control.
- Display Brightness: On standby, the display brightness is reduced by 30%. During operation, if there is no activity for 10 seconds, the display brightness will also be reduced by 30%.
- Automatic Standby: The system features an ERP low power consumption mode. If no signal input is detected for 30 minutes, the soundbar will automatically enter standby mode.
- Remote Control Battery Installation: The remote requires 2 AAA batteries, inserted without reversed polarity. It operates within a 5-meter range and a 30-degree angle when aimed at the unit.
- Wall Mounting: The soundbar can be wall-mounted by drilling two parallel holes (1/4 inch each) 24.41 inches (620mm) apart. Dowels are required for solid walls. The soundbar is then attached to screws on the wall and pushed to the right by 1/8 inch to lock.
Maintenance Features:
- Cleaning: The device should only be cleaned with a dry cloth.
- Ventilation: Do not block any ventilation openings to ensure proper airflow.
- Power Cord Protection: Protect the power cord from being walked on or pinched, especially at plug points and where it exits the unit. Never use a damaged power cord.
- Accessories: Only use attachments/accessories specified by the manufacturer.
- Placement: Do not install the speaker system near heat sources such as radiators, heat registers, stoves, or other heat-producing apparatus.
- Safety: The manual emphasizes reading all instructions and warnings carefully before use. It warns against opening the device due to the risk of electric shock and advises referring servicing to qualified personnel. It also highlights the importance of ensuring the power supply is correct and avoiding handling the power cord with wet hands.