19
Step 10
LPG BOTTLE SETUP
Remove F001 and replace with the eye bolt
and chain that is in the box. The eye bolt
needs to be rotated until it can rotate no
further, this ensures it is securely installed.
Thread the chain through the handle of the
gas bottle and clip it to either the eye bolt or
the chain depending on the size of the bottle
used. The chain needs to be taught to prevent
the bottle from moving when on the stand.
To prevent stress on the components,
ensure that the length of the chain doesn't
not exceed 80% of the length of the hose
assembly.
WARNING
It is important for the safe usage of Arc or
Arc XL that the gas bottle is secured to
the oven as specified in the instructions
below.
KG
To Previous Page
Loading...
