Video/Audio Connectivity
Playing Video/Audio Through a Connected TV
DVD player
Television
Video
Output
Video
Input
Composite Video and RCA Stereo Audio
Pb/CbY Pr/Cr
R COAXIAL
AUDIO OUT
DIGITAL
L VIDEO
VIDEO OUT
120V ~ 60Hz
Audio
Inputs
Audio
Outputs
Note: Please make sure the power is off before making any connections.
Note: Depending on your
television manufacturer this
input may be yellow or green.
1. Conrm the video out connection type
from the DVD player to the TV. There are
two types of outputs on the DVD player.
Use the Composite (Yellow) output on
the DVD player to connect to the Yellow
video input on the TV (Depending on your
television manufacturer this input may be
yellow or green ) using the included video
cable.
2. Select the INPUT type on the TV from the
remote. Select the input that is the same
as what was used in the initial hook up as
outlined in point
3. If you still have an issue, some television
models require that each Video INPUT
is activated in the television’s setup
menu before any video signals can pass.
Consult with your television manufactures
user manual for further details.
1. Use the Composite Video Output to
send video from the DVD player to a
television.
2. Requires a composite video cable
(included).
3. Use the included composite video cable
to connect the Composite Video Output
to a composite video input on a television.
4. Adjust the connected televisions input
setting to match the input used in the
previous step.
Composite Video Output
Troubleshooting
To Next Page
Need help?
General
